Composition and productionGrey or White Portland cement, marble aggregates, cement pigments, and water. These components are mixed, moulded and then pressed. The hardening, maturing and drying process of cement is made naturally by air, gradually over time. See production video
Applicable standardsCement tiles are not part of, nor regulated by European (CE) or national standards. The laboratory tests we refer to on this page were realised (in the absence of âcement tileâ standards), based on the test protocols for terrazzo or cement and concrete slabbing.
Size toleranceLAENZA laboratories, 2007 AIDICO laboratory, 2011 Difference between the 4 sides of one same tile: +/- 0,2 mm
Thickness difference of one tile: +/- 0,5 mm
Average thickness of the pigmented layer 4mm: +/- 1 mm
Flatness of the surface: Maximum deflection -0,2 mm
Weight and packagingEach tile of 20x20cm (16 mm thickness) weighs 1,35 kg, thus a total of 35 kilos/m2. The weight of the packaging, pallets and protection should be added for transport. Tiles are protected with foam dividers and packaged in 21x21x27 cm cardboard boxes containing 15 tiles and weighing 20 kilos.
Slip rateIFA Laboratory, Germany, 2012,DIN 51-130 standard, 2010 Result: average angle12,2Âº, Classification R10
R10, according to German standards, DIN = suitable for interior floors in indoor public areas, public toilets, toilets, schools and childrenâs playgrounds, operating theatres, corridors, stairs and food processing areas.
LAENSA Laboratory, 2007, UNE-ENV standard 12633, 2003 AIDICO Laboratory, 2011, UNE-ENV standard 12633, 2003 Slip rate Rd Rd 49,1 and 45,3, Classe 3
Class 3 according to UNE standards = adapted to humid indoor Ã¡reas, terraces, changing rooms, shower rooms, bathrooms stairs or slopes >6Âº
Abrasion resistanceAIDICO Laboratory , Spain, 2011, UNE-EN 13748-1 :05 LAENSA Laboratory, Spain, 2009, UNE-ENV 1339 & 13748-2 Length of the abrasive mark: 22,5 and 19,3 mm
The MOSAIC DEL SUR tile is more resistant to abrasion than marble. Length of the mark left by the standard abrasive disc 17 mm Granite 19 mm Ceramics 20 to 22 mm MOSAIC DEL SUR cement tiles 27 mm Marble, travertine 31 mm Slate
Shapes and sizesOf the moulds for cement tiles from factory MOSAIC DEL SUR ( 11/2016 )
Download technical sheet